Reducer Mixing Equipment Product Catalog.pdf
(6), XD, XS type frame (HG21566 21567-94)
This series of racks is the latest standard rack in the chemical industry, and it is a supporting rack for the stirring transmission device (HG21563-94). The XD type is a single fulcrum rack, and the output shaft of the reducer is connected with the stirring shaft by a DF type coupling.The XS type is a double fulcrum frame, the output shaft of the reducer is connected by a HL type coupling, and the two fulcrums are connected by a DF type coupling.The frame is divided into A type (shaft seal adopts 2001, 2003, 2004, 2006 or 2008 mechanical seal) and B type (shaft seal adopts 2002, 2005, 2007 mechanical seal or 506, 516, 606, 616 type stuffing box).The rack output interface can be connected with the tenth part
(2) The installation bottom cover and kettle mouth flange connection listed in Section 2.This series of racks has strong versatility. Due to the selection of DF type couplings and the shaft resting device for installing the bottom cover, the short belt can be removed from the side window of the rack without dismantling the reducer and the rack. Couplings, bearing housings and mechanical seals or stuffing boxes.
Main parameters and dimensions of XD single pivot rack (diameter 200, 250, 300)
Note:
1. The category code Z of the reducer is X series B series cycloid reducer and CFL planetary gear reducer; C is LC type and DC type gear reducer.
2. Other types of reducers can also be matched after the interface is adjusted by our company.
