WG-M357-S3S5.S40 network management level 100Mbps single fiber SC-RJ45 optical fiber transceiver module 40KM

CNFIBERNET fiber optic transceiver product series_Chinese catalog  .pdf
CNFIBERNET fiber optic transceiver product series_English catalog  .pdf

WG-M357  network management型  10/100Mega adaptive        单Core transmission fiber optic transceivermodule

Product introduction:

         WG-M357SC.SXX series products are 10/100M centralized network managed single-fiber bidirectional optical fiber transceiver modules independently developed and produced by our company.It is a plug-in card-type 1 optical and 1 electrical product that can be installed in a 2U 16-slot rack to achieve optical and electrical conversion between 10/100Base-T(X) electrical signals and 100Base-X optical signals.Supports various speeds, single-mode/multi-mode, single-fiber/dual-fiber.The network management interface function of this device is comprehensive and simple to set up. It supports network management methods such as SNMP, WEB firmware upgrade, CONSOLE and TELNET, and can realize centralized remote management of multi-service card central offices through a unified platform.

 

Product features: Remote network management possible

Using high-performance chips to achieve non-blocking transmission and switching performance, ensuring higher security and stability of data transmission

*  The electrical port supports 10/100M, full/half-duplex adaptive/forced functions

*  The electrical port supports MDI/MDIX automatic identification

*  Supports 1*9 module and SFP module (meets DMI (Diagnostic Monitoring Interface) function)

*  Supports 850, 1310, 1550nm and DWDM/CWDM wavelengths specified by ITUT

*  Store-and-forward mode supports packet length 2K bytes, pass-through mode supports 9k Jumbo frames

*  Support port bandwidth control function, the step size is 64Kbps

*  Supports link line-speed loopback test (Loopback) to facilitate line debugging

*  Supports failover (LFP) function, which can quickly locate the failed link

*  Support remote power failure alarm

*  Economical inband management function, supporting 802.3ah and TS1000

*  Powerful centralized management function: supports network management protocol SNMP network management mode

*  Support hot swap

*  Simple installation, complete status indicators, and working status is clear at a glance

*  Supports 2U rack 16 channels and independent rack use.The independent desktop computer has a built-in professional communication power supply, and the rack supports dual power supply redundant backup power supply.

 

Electrical interface:1 10/100M adaptive interface, RJ45; compatible with IEEE802.3, IEEE802.3u, IEEE802.3z

Automatic IdentificationMDI/MDI-X; full/half duplex; 100m transmission distance

Optical port:1 SC/FC  ;Wavelength 850nm/1310nm/1550nm, transmission distance 550m~120KM

powered by:5VDC  Card mode: central office rack; independent: built-in AC 220V or DC -48V;

Power Supply: Card Dimensions:100mm(L)*70mm(W)*26mm(H);Single size: 155mm(L)*127mm(W)*31mm(H)

Operating temperature:-20º~70℃    Relative humidity: 5%-95%

 

Applicable industries:

Metropolitan fiber optic broadband network: suitable for data network operators such as China Telecom, Radio and Television, China Unicom, and China Railcom;

Optical fiber network engineering network: suitable for private networks in finance, government, petroleum, railway, electric power, public security, transportation, education and other industries.